|
Electronic components like capacitors, resistors and hybrids are used in electrical devices that operate by controlling the flow of electrons or other electrically charged particles in devices such as thermionic valves and semiconductors.
Resicoat epoxy powders are lasermarkable, depending on the product and meet UL94 (V-0) .
Electronic components are coated in a fluidized bed .
Typical technical data of the encapsulation of electronic components:
| Powder Properties |
|
| Gel time at 160° C (ISO 8130-6) |
50 - 90 sec. |
| Density (ISO 8130-2) |
1.4 - 1.7 g/cm³ |
| Softening Kofler |
> 60° C |
| Storage stability |
4 months at ≤ 6° C |
|
|
| Coating Values |
|
| Curing cycle |
90 min., 140° C |
| Thermal expansion coefficient (20° C) |
3 x 10-5/K |
If you require further specific information on the products available please contact us at resicoat@akzonobel.com.
|
|
|