Single Layer FBE Coatings
|
Resicoat Single Layer Pipe Coatings
Resicoat Single Layer Pipe Coatings comprise a range of stand-alone pipeline protection coatings. They are the most cost-effective coatings for general pipeline operations.
Some of their outstanding performance features are:
- Excellent adhesion to metal substrate
- High resistance to cathodic disbonding
- Excellent corrosion resistance and mechanical properties
- High bendability, even at higher film thickness
Application Process
Resicoat pipe powders should be applied to clean near white metal (e. g. acc. SSPC-SP 10) pipe surfaces having an open and angular anchor pattern and a surface profile of 50-100 µm (2-4 mils). Appropriate chemical treatments are recommended. The application temperature for FBE powders should be between 210-240° C (410-465° F). Film thicknesses between 300-700 µm (12-28 mils) are recommended.
Typical Technical Data for Resicoat Single Layer Pipe Coatings
| Powder Characteristis |
Standard |
Properties |
| Colour |
|
grey, green, yellow, blue |
| Gel time 200° C |
ISO 8130-6 |
25 - 45 sec. |
| Storage stability |
|
12 months ≤ 23° C |
| Impact resistance |
CSA 12.12 |
2.5 Joule |
Cathodic disbondment |
CSA 12.8
65° C, -3.5 V, 24 h
20° C, -1.5 V, 28 d |
2 mm
4 mm |
Cathodic disbondment
on 2.5° strained coating |
CSA 12.13 |
pass |
Flexibility at -30° C |
CSA 12.11
3° at -30° C |
no cracking |
Adhesion of the coating |
CSA 12.14
75° C, 24 h
75° C, 28 d |
rating max. 2
rating max. 2 |
| Taber abrasion resistance |
ASTM D 4060-01 |
< 50 mg loss per 1000 cycles |
If you require further specific details on the products available, please contact us at resicoat@akzonobel.com.
|
|
|