TOOLBOX
Advanced Search
Coverage Calculator
Print
Glossary
Home>Appliance>Freezer

Freezer

Interior/Exterior Freezer Product Detail

 Our powder coatings for freezers provide a high gloss finish.  These powders exhibit superior UV durability and are lower in cost compared to other powders.  They offer greater application efficiency, increasing transfer efficiency by 25-35%, reducing powder delivery rates up to 50% and allowing for more precise control of film thickness and uniformity.

Powder Properties
Specific Gravity 1.50 to 2.0
Typical Cure Conditions 375°F for 15 - 20 minutes

Cured Film Properties


Test substrate is iron or zinc phosphate cold rolled steel with 1.2 - 1.6 mils. of cured coating.

Gloss (ASTM D-523, 60°) 80 - 90
Conical Mandrel (ASTM D-522) Pass 1/8"
Pencil Hardness (ASTM D-3363) 2H
Impact (ASTM D-2794)
  Direct
  Indirect
120 inch-pounds
120 inch-pounds
Adhesion (ASTM D-3359-B) Pass 100 %
Heat Resistance
  Blisters/ Peeling
  Loss of Gloss
None
<10%
Grease Resistance
  (360 hours, 80°F, 80% humidity, 50% Oleic acid/ 50% cotton seed oil)		 Pass
Salt Spray (ASTM B-117)
  Creep from scribe after 500 hours
  Blistering
<1/16th inch
None
Humidity Resistance (ASTM D-2247) @ 1000 hours
  Blistering
  Discoloration
  Rust Creep
  Loss of Adhesion
None
None
None
None


For more information on this product please contact us


Print
    Printed from the Internet