TOOLBOX
Advanced Search
Coverage Calculator
Print
Glossary
Home>Appliance>HVAC

HVAC

Our powder coating for air conditioning provides the high gloss finish OEMs are looking for. This powder offers faster, or lower temperature, curing than that of other powders while maintaining excellent mechanical properties at film builds above 3 mils with no out gassing. Over-bake color stability and edge coverage are also very good.

For more information on this product please contact us


 

Powder Properties

 
Specific Gravity 1.30 to 2.0
Typical Cure Conditions 380°F for 15 minutes

 

Cured Film Properties


Test substrate is iron or zinc phosphate cold rolled steel with 2.0 - 3.0 mils. of cured coating.
Gloss (ASTM D-523, 60B) 90+/-5
Conical Mandrel (ASTM D-522) Pass 1/8"
Pencil Hardness (ASTM D-3363) 2H minimum
Impact (ASTM D-2794)
  Direct
  Indirect
160 inch-pounds
160 inch-pounds
Adhesion (ASTM D-3359 Method B) Pass 100 %
Salt Spray (ASTM B-117)
  Creepage from scribe after 500 hours
  Blistering
less 1/16 inch
None
Humidity Resistance (ASTM D-2247) @ 1000 hours
  Blistering
  Discoloration
  Rust Creepage
  Loss of Adhesion
None
None
None
None
QUV Resistance
  Gloss loss after 240 QUV Exposure
Less than 20


Print
    Printed from the Internet