TOOLBOX

Range

 

Range Product Detail

Our powder coatings for ranges provide a high gloss finish and are FDA approved.  This powder exhibits superior UV durability and is lower in cost compared to other powders.  This powder offers greater application efficiency, increases transfer efficiency by 25-35%, reduces powder delivery rates up to 50% and allows for more precise control of film thickness and uniformity.


For more information on this product please contact us

Powder Properties

 
Specific Gravity 1.30 to 2.0
Typical Cure Conditions 380°F for 15 minutes



Cured Film Properties

Substrate CRS Iron Phosphate
Cure Condition 20 min. @ 380-390°F
Film Thickness 1.8-2.4 mils.
Gloss
  Gardner 60
  Gardner 20

85 +/-5
60 +/-5
Pencil Hardness 2H
Impact Resistance (ASTM D-2794)
  Direct
  Indirect

160 inch-pounds
160 inch-pounds
Flexibility (Conical Mandrel Pass 1/8"
Adhesion (Cross Hatch) Pass 100%
Over Bake Resistance E <0.5
Heat Resistance E <0.5
Stem Resistance No blister, No appreciable color or gloss change
Inter Coat Adhesion Pass 100%
Salt Fog Resistance (ASTM B-1178) 504 hours
  Blistering
  Under cutting/ Creep

None
<1/16 @ Scribe
Humidity Resistance (ASTM D-2247) 720 hours
  Blistering
  Discoloration
  Loss of Gloss

None
None
None
Abrasion Resistance (ASTM D-4060) 8 mg. Loss per 100 cycles
Food Stain Resistance
  Mustard (French Yellow)
  Barbecue Sauce (Kraft Mesquite Smoke)
  Lemon Juice (Real Lemon in bottle)
  Grape Juice (Welch's-Purple)
  Beef Gravy
  Butter (Land of Lakes)

Slight stain
No visible change
No visible change
No visible change
No visible change
Slight stain
Household Products Resistance
  Windex (SC Johnson Wax)
  Formula 409(Clorox)
  Ammonia
  Bleach (Clorox)
  Lysol (Lestoil)
  Fantastick (Dow Chemical)

No visible change
No visible change
No visible change
No visible change
No visible change
No visible change
Oven Cleaner Resistance (Easy Off) Slight stain
Color Retention (ASTM G-26)
  Xenon-arc, 240 hrs.
  No condensation Cycle

Slight gloss change
No color change