TOOLBOX

Refrigerator

Interior/Exterior Refrigerator Product Detail

Our powder coating for refrigeration provides a high gloss finish in a variety of colors to meet OEM specifications.  This powder exhibits excellent corrosion protection and chemical resistance when applied over a properly prepared metal substrate, and has been approved by General Electric for specification F50LI30A and F50LE30D.


Powder Properties


Specific Gravity 1.50 to 2.0
Typical Cure Conditions 360°F for 20 minutes

Cured Film Properties


Test substrate is iron or zinc phosphate cold rolled steel with 1.2 - 1.6 mils. of cured coating.

Pencil Hardness (Eagle Pencil) 2H minimum
Impact (Gardener ASTM D-2794)
  Direct
  Reverse

160 inch-pounds
160 inch-pounds
Gloss (Gardener 60) 90+
Wedge Bend (Conical Mandrel) Pass 1/8 inch
Salt Spray (ASTM B-117)
  Creep from scribe after 1000 hours exposure
  Blistering

Less than 1/8 inch
None
Humidity Test
  Blistering
  Gloss Change

None
None
Aging (7 days@ 150°F Pass
Tape Adhesion Pass
Fungus Resistance Pass
Grease Resistance Pass
Alkali Resistance Pass
Stain Resistance Pass
Taber Abraser (ADTM D4060-81: CS10, 1000 GRAM LOAD
  Weight loss, 1000 cycles <60 mgs.

Pass
Cross Hatch (Adhesion) Pass 100%

For more information on this product please contact us