TOOLBOX
Advanced Search
Coverage Calculator
Print
Glossary
Home>Appliance>Wire Shelving

Wire Shelving

Wire Shelving product detail

Our powder coating for wire shelving provides a high gloss finish.  This powder exhibits excellent corrosion protection, chemical resistance and superb adhesion when applied over a properly prepared substrate.


For more information on this product please contact us


Powder Properties

 
Specific Gravity 1.50 to 2.0
Typical Cure Conditions 375°F for 15 minutes

Cured Film Properties


Test substrate is iron or zinc phosphate cold rolled steel with 1.5 - 2.0 mils. of cured coating.

Gloss (ASTM D-523, 60°) 90 minimum
Conical Mandrel (ASTM D-522) Pass 1/8"
Pencil Hardness (ASTM D-3363) 1H/2H
Impact (ASTM D-2794)
  Direct
  Indirect
160 inch-pounds
160 inch-pounds
Adhesion (ASTM D-3359 B) Pass 100%
Salt Spray (ASTM B-117)
  Creep from scribe after 500 hours
  Blistering
<1/16th inch
None
Humidity Resistance (ASTM D-2247) @ 1000 hours
  Blistering
  Discoloration
  Rust Creep
  Loss of Adhesion
None
None
None
None


Print
    Printed from the Internet