Interpon D3000 Fluoromax Architectural Powder Coating

1. Product Name

AkzoNobel Interpon D3000 Fluoromax Architectural Powder Coating

2. Manufacturer

Akzo Nobel Coatings Inc. – Powder Coatings

Nashville TN 37210

Phone:     (800) 626-7891 Ext 4

Email:      marketingservices_us@akzonobel.com;
Website:   www.interpon.com/usa

3. Product Description

BASIC USE AND APPLICATIONS

Interpon D3000 Fluoromax is a new generation architectural powder coating from AkzoNobel that provides levels of exterior durability previously achievable only with liquid fluorocarbon paints. It combines the performance characteristics of fluorocarbon chemistry with the application, cost and environmental benefits of powder.

AkzoNobel’s Fluoromax technology uses innovative fluorocarbon chemistry to create a new class of powder coating – Hyper Durable. With the specific aim of improving resistance to degradation by Ultra Violet (UV) light, the technology allows the coating to retain its appearance and properties under the most severe conditions, for the longest possible time.

Available in a range of standard and custom colors, metallic effects and gloss levels, D3000 Fluoromax is a technically and environmentally benign alternative to liquid PVF2 systems.

BENEFITS

As well as being stable under UV attack, the carbon-fluorine bond is also resistant to chemicals and solvents. This reduces soiling – an additional advantage. Dirt will not readily adhere and consequently cleaning may be reduced. AkzoNobel has used patented thermosetting Fluoropolymer chemistry to provide excellent appearance and adhesion in a one-coat powder system.

Interpon D2000 ultra-durable powder coatings are cost effective and solvent free solutions to exterior and interior coating requirements. Powder coatings offer superior abrasion and weathering resistance, even in corrosive atmospheres. Powder coating application technology eliminates VOC emissions, provides a significantly lower waste stream compared with shop-applied liquid coatings.

4. Technical Data

REFERENCED STANDARDS

American Architectural Manufacturers Association (AAMA):

·       AAMA 2605 – Voluntary Specification, Performance Requirements and Test Procedures for Superior Performing Organic Coatings on Aluminum Extrusions and Panels

ASTM International (ASTM):

·       ASTM B 117 – Standard Practice for Operating Salt Spray (Fog) Apparatus

·       ASTM D 523 – Standard Test Method for Specular Gloss

·       ASTM D 968 – Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive

·       ASTM D 2244 – Test Method for Calculation of Color Differences from Instrumentally Measured Color Coordinates

·       ASTM D 2247 – Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity

·       ASTM D 4214 – Test Methods for Evaluating Degree of Chalking of Exterior Paint Films

International Organization for Standards (ISO):

·       ISO 3231 – Paints and varnishes – Determination of resistance to humid atmospheres containing sulfur dioxide

PHYSICAL/CHEMICAL PROPERTIES

The AAMA 2605 test results shown below are based on mechanical and chemical tests which (unless otherwise indicated) have been carried out under laboratory conditions on a chromate-treated aluminum substrate at 2.4 to 3.2 mils thickness and are given for guidance only. Actual powder coating performance depends upon the circumstances under which the product is applied and used.

·       Color Uniformity, AAMA 2605: Pass; consistent within 2 Delta E per ASTM D 2244

·       Specular Gloss: AAMA 2605: Pass; values within +/- 5 units of specification per ASTM D 523

·       Dry Film Hardness, AAMA 2605:  Pass F minimum

·       Dry Adhesion, AAMA 2605:  Pass; no film removal

·       Wet Adhesion: AAMA 2605: Pass, no blistering

·       Boiling Water Adhesion: AAMA 2605: Pass, no blistering

·       Impact Resistance, AAMA 2605:  Pass; no tape removal of film to substrate following 0.10 inch (2.54 mm) deformation

·       Abrasion Resistance, AAMA 2605:  Pass; abrasion coefficient >40 per ASTM D 968

·       Chemical Resistance:  Generally good resistance to acids, alkalis and oils at normal temperature

·       Muriatic Acid Test: AAMA 2605: Pass, no blistering or visual change in appearance

·       Mortar Resistance, AAMA 2605, 24-hr Pat Test: Pass; no loss of film or visual change in appearance

·       Nitric Acid Resistance, AAMA 2605: Pass Delta E (Hunter) <5

·       Detergent Resistance, AAMA 2605: Pass, no blistering, no adhesion loss

·       Window Cleaner Resistance, AAMA 2605: Pass, no blistering or loss of film

·       Humidity Resistance, AAMA 2605:  Pass at 4000 hours - blister formation less than "few" size no. 8 per ASTM D 2247

·       Salt Spray Resistance, AAMA 2605:  Pass at 4000 hours at 35 deg. C; creepage from scribe rating 7; blister rating 8, per ASTM B 117

·       Weathering, 10 years Florida Exposure, AAMA 2605:  Color Change Delta E <5 per ASTM D 2244; Gloss Retention >50% per ASTM D 523; Chalking - none in excess of No.8 for colors, No. 6 for whites per ASTM D 4214; Resistance to Erosion < 10% film loss.

The following test is in addition to AAMA 2605 tests:

·       Sulphur Dioxide ISO3231 (Kesternich):  Pass; no blistering, loss of gloss or discoloration

SUSTAINABLE DESIGN BENEFITS

·       No solvent emission

·       Lead-, heavy-metal-, and TGIC- free product

·       Recyclable and reclaimable in powder form as part of application process

·       No polluting emission when aluminum substrate is recycled

·       Enhanced durability reduces need for field-applied recoating

RELATED LEED CREDITS

·       LEED for Schools IEQ Credit 4.2:  Low-Emitting Materials – Paints and Coatings:  Applies to coatings installed in the building interior

5. Application

ALUMINUM SUBSTRATE

Interpon D3000 Fluoromax should only be applied to virgin, mill finish architectural grade aluminum. Acceptable alloys include AA6060 (AlMgSi 0.5), AA6063, AA5005, AA5053 or suitable equivalents.

Recycled, stripped or low quality aluminum can lead to reduced corrosion resistance in service in certain applications. In particular, high levels of iron, copper or carbon contamination can increase the risk of filiform corrosion in marine or industrial atmospheres.

PRETREATMENT

For maximum protection it is essential to pre-treat components to AAMA specifications prior to the application of Interpon D3000 Fluoromax.  Aluminum components must receive a full multi-stage chromate conversion coating or suitable chrome-free pre-treatment to clean and condition the substrate. Consult pre-treatment supplier.

APPLICATION

Interpon D3000 Fluoromax can be applied by manual or automatic electrostatic spray equipment.  For solid shades, unused powder can be reclaimed using suitable equipment and recycled through the coating system.  For mixed colors and certain special finishes, advice must be sought from the manufacturer, as to the suitability or otherwise of the product for recycling. For all mixed color/special effect systems, advice must be sought as to the correct mixing ratio for virgin/reclaim powder.

Interpon D3000 Fluoromax is based on fluorocarbon polymer chemistry hence it will not charge through conventional PTFE based tribo systems. Please contact Akzo Nobel technical department or consult with equipment supplier for alternatives.

PROTECTION OF COATED PRODUCTS

Interpon D3000 Fluoromax is a tough, durable coating, but it is advisable to protect coated products that are subject to damage which may occur during fabrication, shipping and handling, or installation. Corner protection of window and door units is recommended. Damage that does occur should be immediately repaired using AkzoNobel's recommended repair procedures, preferable prior to installation.

STORAGE AND HANDLING OF COATED PRODUCTS

Store and handle products according to manufacturer's written recommendations. Avoid contacting coated surfaces with adhesive shipping tapes.

SEALANTS AND MASTICS

The application of sealants, mastics and structural glazing adhesives to powder coated aluminum components is widespread and well established.

Compatibility testing is generally available through the manufacturers of sealants, mastics and structural glazing adhesives.

6. Availability

AkzoNobel Interpon Powder Coatings are manufactured at more than 25 locations in 20 countries on 5 continents. They are available through approved applicators worldwide; contact AkzoNobel Powder Coatings for local contact information.

7. Warranty

APPROVED APPLICATOR WARRANTY PROGRAM

Extended applicator warranties up to 25 years are available from AkzoNobel's Approved Applicators. Approved Applicators utilize a Quality Management System meeting AAMA and ISO9002 standards. AkzoNobel Powder Coatings carries out periodic and random checks for applicator approval. Contact applicators for details of available warranties.

8. Maintenance

Interpon D3000 Fluoromax is naturally resistant to chemicals and solvents. This reduces soiling; dirt will not readily adhere and consequently cleaning in service is reduced.

CLEANING METHODS

Usual maintenance of Interpon D products can be performed with an appropriate cleaning product, followed by clear water rinsing and wiping using a soft cloth. All surfaces should be cleaned using a soft cloth or sponge, using nothing harsher than natural bristle brushes.

If the project is subject to any hazardous unusual environmental factors, or is close to salt water, an estuary or marine environments then AkzoNobel must be consulted on an individual project basis.

CLEANING PRODUCTS

Prior cleaning, review cleaning agent datasheet. Perform routine maintenance using water with mild detergent (pH 5 to 8). For stains or marks, stronger cleaning products such as products based of alcohol, petroleum spirits, white spirit, or bleach (diluted to 5%) may be selectively applied. Rinse the Interpon D coating immediately after the cleaning product has been used.

In no circumstance should abrasive cleaner or polish, or any cleaner containing ketones, esters be used.

9. Technical Services

Detailed information including product literature, test reports, installation instructions, and information on special applications is available through AkzoNobel.

10. Available Resources