Interpon D3000 FLUOROMAX

Product Description

Interpon D3000 - Fluoromax is a series of hyper-durable powder coatings designed to meet the requirements of AAMA2605-05, the most demanding architectural specification in the world.

AkzoNobel's Fluoromax technology, which uses innovative fluorocarbon polymer chemistry, ensures the system will provide the maximum gloss and color retention in service.  Designed to protect architectural aluminum components. Interpon D3000 - Fluoromax exploits the recognized benefits of powder coatings to give excellent cosmetic and functional protection.

Available in a selected range of colors, metallic effects and gloss levels Interpon D3000 - Fluoromax is a technically and environmentally benign alternative to liquid PVF2 systems.

For more information on this product please contact us.

Powder Properties

Particle Size	Suitable for electrostatic spray
Specific Gravity	1.2-1.75 g/cm3 depending on color
Storage	Dry cool conditions below 75˚F
Shelf Life	6 months
Sales Code	8 Series
Stoving Schedule	43 - 85 minutes at 360˚F 26 - 60 minutes at 375˚F 13 - 40 minutes at 392˚F 10 - 18 minutes at 410˚F

Test Conditions

The results shown below are based on mechanical and chemical tests which (unless otherwise indicated) have been carried out under laboratory conditions and are given for guidance only. Actual product performance will depend upon the circumstances under which the product is used.

Substrate	Aluminum
Pretreatment	Chromate
Film Thickness	2.4 - 3.2 mils
Curing Schedule	15 minutes at 400˚F

Mechanical Tests

Dry Adhesion	AAMA2605-05, 7.4	Pass - No film removal
Impact Resistance	AAMA2605-05, 7.5	Pass - No tape removal of film to substrate following 0.1" deformation
Dry Film Hardness	AAMA2605-05, 7.3 D3363	Pass F - no rupture of film
Abrasion Resistance	AAMA2605-05, 7.6	Pass - abrasion coefficient value 40 min

Chemical and Durability Tests

Salt Spray	AAMA2605-05, 7.8.2 ASTM B117	Pass at 4000 hours - No corrosion more than 1/32" - 1/16" from scribe.  Minimum blister rating 8
Constant Humidity Resistance	AAMA2605-05, 7.8.1 ASTM D2247 ASTM D714	Pass at 4000 hours - Blister formation less than "few" size no. 8
Permeability	AS3715 2002	Pass
Sulphur Dioxide	ISO3231 (Kesternich)	Pass - No blistering, loss of gloss or discoloration.

Chemical Resistance

Generally good resistance to acids, alkalis and oils at normal temperature.

Exterior Durability

10 yr Florida Exposure AAMA2605-05 ASTM D4214 : D658 D2214

Excellent performance color change ∆E <5, gloss retention >50%.  chalking - None in excess of No. 8 for colors, No. 6 for whites.

Color Stability at elevated temperatures

Good

Pretreatment

For maximum protection it is essential to pretreat components prior to the application of Interpon D3000 - Fluoromax. Aluminum components should receive a full multi-stage chromate conversion coating or suitable chrome-free pretreatment to clean and condition the substrate. Detailed advice should be sought from the pretreatment supplier.

Application

Interpon D3000 - Fluoromax can be applied by manual or automatic electrostatic spray equipment.  It is recommended that for consistent appearance and application product be fluidized during application.  For solid shades, unused powder can be reclaimed using suitable equipment and recycled through the coating system.  For mixed colors and certain special finishes, advice must be sought from the manufacturer, as to the suitability or otherwise of the product for recycling.  For all mixed color/special effect systems, advice must be sought as to the correct mixing ratio for virgin/reclaim powder.  For application of the D-Series Architectural Products, the required Dry Film Thickness (DFT) is 2.4 - 4.5 mils, with no measurements below 1.8 mils. 

Interpon D3000 - Fluoromax is based on fluorocarbon polymer chemistry hence it will not charge through conventional PTFE based tribo systems.  Please contact AkzoNobel technical department or consult with equipment supplier for alternatives.

Safety Precautions

When using do not eat, drink or smoke.  Do not breather the dust.  In case of insufficient ventilation wear suitable respiratory equipment.

This product can release an irritating fume on cure.  Ensure adequate ventilation/extraction when curing this product to minimize fuming.  Hydrogen fluoride and carbonyl fluoride may be evolve at or above 446˚F with larger amounts at higher temperatures, overheating or burning.

Disclaimer

The information given in this sheet is not intended to be exhaustive and any person using this product for any purpose other than that specifically recommended this sheet without first obtaining written confirmation from us as to the suitability of the product for the intended purpose does so at his own risk.  While we endeavor to ensure that all advice we give about the product (whether in this sheet or otherwise) is correct we have no control over either the quality or condition of the substrate or the many factors affection the use and application of the product.  Therefore, unless we specifically agree in writing to do so , we do not accept any liability whatsoever or howsoever arising for the performance of the product or for any loss or damage (other than death or personal injury resulting from our negligence) arising out of the use of the product.  The information contained in this sheet is liable to modification from time to time in the light of experience and our policy to continuous product development.